If you’ve recently become a car owner, congratulations! Now comes the responsibility of keeping your vehicle in good shape. One of the simplest and most important tasks in car maintenance is the oil change. While it may sound intimidating, with the right tools and guidance, it’s something many people can do at home—even if it’s your first time.

What You’ll Need Before Starting

To do an oil change yourself, you’ll need:

• New engine oil (check your owner’s manual for the correct type and amount)

• A new oil filter

• An oil filter wrench

• A socket wrench

• A funnel

• A drain pan

• Gloves and rags

Make sure the engine is cool and the car is parked on a level surface.

Step-by-Step Oil Change Process for Beginners

1. Locate the Drain Plug: Slide under the car and find the oil drain plug on the oil pan.

2. Drain the Old Oil: Place the pan underneath, unscrew the plug, and let the oil fully drain (this may take 5–10 minutes).

3. Remove and Replace the Oil Filter: Use the oil filter wrench to take off the old filter. Lubricate the gasket on the new one with fresh oil and screw it in place.

4. Refill with New Oil: Replace the drain plug, open the hood, and use a funnel to pour in the new oil.

5. Check Levels: After running the engine for a minute, turn it off and wait a few minutes, then check the dipstick to make sure the oil is at the correct level.

Keep Your Engine Healthy and Save Money

Doing your own oil change saves you time and money and helps you connect with your car on a practical level. It’s also a great introduction to basic car care. Just be sure to dispose of used oil responsibly—most auto shops will recycle it for free.

Taking control of your vehicle’s maintenance starts with simple tasks like this. So roll up your sleeves and give your car the care it deserves!

READ MORE:

Oil Change Process Breakdown: Choosing the Right Oil for Your Vehicle

The post Quick and Easy Oil Change Process: Tips for First-Time Car Owners appeared first on Auto Precision Repair.

An oil change isn’t just about draining old oil and pouring in the new—it’s about choosing the right oil for your engine’s needs. With so many types on the market (conventional, synthetic, high-mileage, blends), it’s easy to feel overwhelmed. But don’t worry. This guide will break down the process and help you make a smart, engine-friendly choice.

Why Oil Type Matters in Every Oil Change

Motor oil lubricates your engine’s moving parts, reduces friction, prevents overheating, and captures dirt and particles. Using the wrong type of oil can lead to poor fuel economy, increased engine wear, and even costly damage over time. That’s why selecting the proper oil is critical during every oil change.

Understanding Oil Types

• Conventional Oil: Ideal for older, low-mileage engines and budget-conscious drivers. It gets the job done but requires more frequent changes (every 3,000–5,000 miles).

• Synthetic Oil: Engineered for high performance and longer change intervals. It flows better in extreme temperatures and offers superior engine protection—great for newer cars or those with turbochargers.

• Synthetic Blend: A mix of conventional and synthetic oils, offering a balance of performance and cost. Perfect for moderate driving conditions.

• High-Mileage Oil: Specially formulated with additives to reduce leaks and protect seals in vehicles with over 75,000 miles.

Always check your vehicle’s owner manual or consult a trusted mechanic for the manufacturer’s recommendation.

Consider Your Driving Habits and Climate

If you frequently drive in stop-and-go traffic, live in a cold or very hot climate, or tow heavy loads, synthetic oil is likely your best bet. It maintains viscosity and protection better under stress compared to conventional oils.

Make Your Oil Change Count

Every oil change is an opportunity to give your engine the protection it needs—starting with the right oil. Skipping the research or relying on outdated products could shorten your vehicle’s life and efficiency.

Next time you’re due for service, ask yourself: am I using the oil my engine truly needs? Choose smart, drive safe.

READ MORE:

Quick and Easy Oil Change Process: Tips for First-Time Car Owners

The Oil Change Process: What to Expect During Your Next Service Visit

The post Oil Change Process Breakdown: Choosing the Right Oil for Your Vehicle appeared first on Auto Precision Repair.

If you’ve ever dropped off your car for an oil change and wondered what the mechanic was actually doing under the hood, you’re not alone. While it may seem like a routine task, the oil change process plays a critical role in your vehicle’s health. Understanding what happens during a professional service can help you appreciate its value—and spot when something’s missing.

Step 1: Vehicle Inspection and Preparation

Your service visit usually begins with a basic inspection. Technicians check fluid levels, tire pressure, and look for any obvious issues. Then, your vehicle is lifted using a hydraulic lift or ramps for easier access to the oil pan and filter.

Step 2: Draining the Old Oil

The technician removes the oil drain plug from the oil pan, allowing the old oil to drain into a catch basin. This used oil is typically dark, dirty, and full of engine contaminants—precisely why timely oil changes are essential.

Step 3: Replacing the Oil Filter

The old oil filter, which collects particles and sludge, is removed and replaced with a fresh one. The technician applies new oil to the filter’s gasket before installation to ensure a tight seal.

Step 4: Adding New Oil

The correct grade and amount of new oil is poured into the engine. The technician consults your vehicle’s manual to ensure compatibility, whether it’s conventional, synthetic, or a blend.

Step 5: Final Checks and Cleanup

After topping off the oil, the engine is briefly run to circulate it through the system. The mechanic checks for leaks, rechecks oil levels, and usually offers a printed report showing what was done.

Why It Matters: A Small Service with Big Impact

A routine oil change might take only 30–45 minutes, but it’s one of the most cost-effective ways to extend your engine’s life, improve gas mileage, and reduce wear and tear. Skipping it can lead to sludge buildup, overheating, and expensive repairs.

Next time you schedule an oil change, know that you’re doing something big for your engine—one quart at a time.

READ MORE:

Oil Change Process Breakdown: Choosing the Right Oil for Your Vehicle

DIY Oil Change Process: How to Change Your Car’s Oil at Home

The post The Oil Change Process: What to Expect During Your Next Service Visit appeared first on Auto Precision Repair.

Doing your own oil change is one of the easiest and most rewarding DIY car maintenance tasks. Not only does it save you money, but it also gives you confidence in caring for your vehicle. Whether you’re a first-timer or just brushing up on the basics, this guide will walk you through the full oil change process—safely, efficiently, and cleanly.

What You’ll Need Before You Start

To begin your oil change at home, gather these essential tools and supplies:

• New engine oil (check your car’s manual for type and quantity)

• New oil filter

• Oil filter wrench

• Socket wrench

• Oil drain pan

• Funnel

• Jack and jack stands (or car ramps)

• Gloves and rags

Always work on a cool engine to avoid burns.

Step-by-Step Oil Change Process

1. Raise Your Car Safely
   Use ramps or jack stands to lift the front of the car. Engage the parking brake and place wheel chocks behind the rear wheels for safety.

2. Drain the Old Oil
   Locate the oil drain plug underneath the engine. Use a socket wrench to unscrew it and let the old oil drain into a pan. This may take a few minutes.

3. Replace the Oil Filter
   Use an oil filter wrench to remove the old filter. Before installing the new one, apply a little new oil to the gasket for a better seal.

4. Add New Oil
   Once the drain plug is back in place and the filter is installed, pour in the new oil using a funnel. Refer to your manual for the correct amount.

5. Check Your Levels
   Start the engine, let it run for a minute, then turn it off. Wait a few minutes and check the dipstick. Add more oil if needed.

6. Dispose of Used Oil Properly
   Take the used oil and filter to a recycling center or auto parts store that accepts oil waste.

A Little Work, Big Payoff

Doing your own oil change can save $30–$70 per service and helps your engine run smoother and longer. Plus, it builds mechanical skills that every car owner should have.

Want to take better care of your vehicle? Start with your next oil change—right in your driveway.

READ MORE:

The Oil Change Process: What to Expect During Your Next Service Visit

The post DIY Oil Change Process: How to Change Your Car’s Oil at Home appeared first on Auto Precision Repair.